河南新型防爆振动电机生产厂家让你了解新型防爆振动电机日常保养知识

河南新型防爆振动电机生产厂家让你了解新型防爆振动电机日常保养知识，安阳豫北电机有限公司是国家中小型特种电机制造企业会员单位，公司特聘请西安交大教研室退休教授为电气设计导师。公司吸取了国内外电机行业的设计先进理念，研制开发制造的隔爆型振动电机已广泛应用于煤炭、化工、电力、建材、矿山、冶金、铸造、石油、粮食等行业，是给料机、振动筛、脱水筛、落料机、输送机、放矿机、料仓防闭塞装置等振动机械的首选激振源。本公司产品具有外型美观、噪声低、振动小、运行安全可靠等特点，本公司经过国家级考核认证已取得《防爆合格证》、国家质检总局颁发的《全国工业产品生产许可证》。欢迎大家我厂实地考察或来电咨询。新型防爆振动电机日常保养知识：
  1.防爆型振动电机的轴承要定期（1000小时）用油枪向轴承室注高温润滑脂，每个轴承注量为5-10cc。不准乱用其它牌号的润滑脂。经常检查电机表面卫生。    
  2.该机在累计运行达5000小时后应拆卸全面检修保养，并对轴承及轴承盖进行清洗同时检查轴承，更换磨损严重的轴承，然后填充油量为空间体积，有粉尘影响散热时及时清理。
1/3-1/2的润滑脂。       
  3.该机库存半年以上，安装使用前应对轴承拆卸清洗换油。经常检查电机地脚固定螺栓是否松动。    
  4.该机每年须进行一次大清理，对电机内部积垢，油污进行清洗，此工作可与换油工作同时进行。松动时用力矩扳手紧固至要求力矩。               
      
隔爆型振动三相异步电动机(简称防爆型振动电机),其工作原理和通用型振动电机类似, 是利用两端的偏心块高速旋转产生振动力作为振动源.该系列防爆振动电机具有设计合理、结构紧凑、激振效率高、节能、寿
命长、运行可靠,安装调试方便等优点,可作为振动料斗、振动筛、圆振筛、振动给料机、振动输送机的要求防爆环境工作振动源.其防爆性能符合GB3836.2-2000《爆炸性气体环境用电气设备——隔爆型“d》。
Henan new explosion-proof vibration motor manufacturers make you understand the new explosion-proof vibration motor routine maintenance knowledge, Anyang Yubei Electric Co., Ltd. is national small and special motor manufacturing enterprise member units, the company specially please Xi'an Jiaotong University Department of Professor Emeritus of electrical design for the tutor. Companies learned domestic motor industry advanced design idea, development development and manufacturing of flameproof type vibration motor has been widely used in the industries of coal, chemical industry, electric power, building materials, mining, metallurgy, casting, such as oil and food, is a feeder, vibrating sieve, sieve dehydration, blanking machine, conveyor, ore, bin anti occlusion device vibration mechanical preferred excitation source. The company's products with has the advantages of beautiful appearance, low noise, small vibration, safe operation reliable, the company through the national certification examination has been made in the explosion-proof certificate ", issued by the State General Administration of quality supervision, inspection and quarantine the national industrial products production license". Welcome to our factory site visits or telephone consultation. Daily maintenance knowledge of new type explosion proof vibration motor:
1. The explosion-proof type vibration motor bearings to regularly (1000 h) using a gun to the bearing chamber high temperature grease, each bearing injection quantity for 5-10cc. Do not use other brands of grease. Regular inspection of motor surface hygiene.
2. The machine in the running for a total of 5000 hours after should remove overhaul and maintenance, and to the bearing and bearing cover for cleaning and check the bearing, replace worn serious bearing, then fill the oil volume is the volume of the space, dust impact of heat when clear in time.
1/3-1/2 grease.
More than 3 of the stock for half a year, before the installation and use to remove bearing cleaning and changing. Always check the motor fixed anchor bolts are loose.
4. The machine every year to be a clearing, the motor internal fouling, cleaning oil, this work can work with oil at the same time. Fastening to the required torque with a torque wrench.
Flameproof type vibration three-phase asynchronous motor (referred to as explosion-proof type vibration motor), similar to its working principle and common type vibration motor, using both ends of the eccentric block to rotate at a high speed produces vibration as a source of vibration. The series of explosion-proof vibration motor has reasonable design, compact structure, high excitation efficiency, energy saving, long life
Long life and reliable operation, convenient in installation and commissioning, as a vibrating hopper, vibrating sieve, circular vibrating screen, vibrating feeder, vibrating conveyor for explosion-proof environment vibration source. The explosion-proof performance with gb3836.2-2000 "explosive gas environment with electrical equipment -- flameproof type" d ".