东莞厂房降温施工公司和你分享空调制冷原理

东莞厂房降温施工公司和你分享空调制冷原理

     表示空调器通电后，制冷系统内制冷剂的低压蒸汽被压缩机吸入并压缩为高压蒸汽后排至冷凝器。同时轴流风扇吸入的室外空气流经冷凝器，带走制冷剂放出的热量，使高压制冷剂蒸汽凝结为高压液体。高压液体经过过滤器、节流机构后喷入蒸发器，并在相应的低压下蒸发，吸取周围的热量。同时贯流风扇使空气不断进入蒸发器的肋片间进行热交换，并将放热后变冷的空气送向室内。如此室内空气不断循环流动，达到降低温度的目的
　　压缩机将气态的氟利昂压缩为高温高压的气态氟利昂，然后送到冷凝器（室外机）散热后成为中温中压的液态氟利昂，因此室外机吹出来的是热风。 液态的氟利昂经 毛细管，进入蒸发器（室内机），空间突然增大，压力减小，液态的氟利昂就会汽化，（从液态到气态是个吸热的过程），吸收大量的热量，蒸发器就会变冷，室内机的风扇将室内的空气从蒸发器中吹过，因此室内机吹出来的就是冷风；空气中的水蒸汽遇到冷的蒸发器后就会凝结成水滴，顺着水管流出去，这就是空调会出水的原因。 然后气态的氟利昂回到压缩机继续压缩，继续循环。公司表示 制热的时候有一个叫四通阀的部件，使氟利昂在冷凝器与蒸发器的流动方向与制冷时相反，因此制热的时候室外吹的是冷风，室内机吹的是热风。 其实就是用的初中物理里学到的液化（由气体变为液态）时要排出热量和汽化（由液体变为气体）时要吸收热量的原理，同时蒸发热量。

      公司，主要经营各类车间降温工程设备：包括环保空调、负压风机、离心风机、柜式风机、降温水帘、通风降温设备、车间抽风降温设备、厂房除尘设备等。

　　Dongguan plant cooling construction company said the air conditioner through power, refrigeration system of refrigerant in the low pressure steam is compressed and compressed to the back of the compressor for the high pressure steam back to the condenser. At the same time, the outdoor air flow through the air flow through the fan is flowing through the condenser, which takes away the heat from the refrigerant, and the high pressure refrigerant vapor is condensed into a high-pressure liquid. High pressure liquid through the filter, the throttle body after the spray into the evaporator, and in the corresponding low pressure evaporation, absorb the heat. At the same time, the flow fan keeps the air in the evaporator of the heat exchange between the ribs, and the air is sent to the interior. So the indoor air circulation, achieve the purpose of reducing the temperature.
　　Compressor will be compressed gas Freon for high-temperature and high-pressure freon, and then sent to the outdoor condenser cooling become medium temperature and medium pressure liquid Freon, so outdoor machine blowing out hot air. Freon liquid by capillary into the evaporator of the indoor machine), the sudden increase in the space, reduce the pressure, liquid Freon will vaporize, from liquid to gaseous is an endothermic process), absorb a lot of heat and the evaporator will be colder and reasons for indoor machine fan will be indoor air from the evaporator is blowing, so blown out by the indoor machine is cold; faced with the cold evaporator air in the water vapor will condense into droplets, along the pipe flow out, this is the air conditioning will be water. Freon then gaseous back to the compressor to compress, continue to cycle. Cooling plant construction company said a called parts of the four-way valve and the freon in the flow direction of the condenser and the evaporator and refrigeration instead, so heating when outdoor blowing cold, indoor machine blowing hot air heating. In fact, the use of the physics of junior high school (gas into liquid) to the discharge of heat and vaporization (by liquid into gas) to absorb the principle of heat, while the evaporation of heat.
　　Dongguan plant cooling construction company, mainly engaged in various types of cooling plant engineering equipment, including environmental protection, air conditioning, suction fan, centrifugal fan, cabinet type fan, cooling water curtain, ventilation cooling equipment, workshop ventilation cooling equipment, plant dust removal equipment etc..