Rockery is how the operation in the production process, below we try to understand theproduction process flow, rockery is how, in order to make it easier to learn about.
The first step to establish the rockery skeleton, to decide the steel structure according to the size of the thickness of the rockery, keel, and, in the construction of steel structure at the same time also will together build scaffolding
Stand up.
Second steel such as basic modeling rockery will welding, the process to be considered goodskeleton load-bearing capacity. Then with the angle of the local further reinforcement
. Subsequently the shape into fifteen centimeters of the small box, keel and to do well the handlerust.
The third part is used galvanized steel wire will wrap up, mesh in 2 centimeters, and then will notsandy cement adding filaments coated wire mesh above a layer of water, etc.
Mud dry and then use 1, 1 of the cement mortar altered surface, so that the upper stronger.
The Fourth Department will dry cement plastering layer, if it is to use color painting, after don't do color.
Fifth removal of the scaffolding, pull on the spot.
假山在生产过程中是怎样的操作，下面我们来了解一下，假山生产过程中流程是怎样的，以便于我们更容易的了解。
第一步要建立假山的骨架，根据假山的大小来决定钢结构，龙骨的粗细，并且，在建设钢结构的同时还要将脚手架一起建
立起来。
第二部用钢材之类的将假山的基本造型焊接出来，这个过程要考虑好骨架的承重能力。接着要用角钢将局部进一步的加固
。随后再将外形分成十五厘米左右的小方格，龙骨同时也要做好放生锈的处理。
第三部用镀锌的铁丝网将钢架包裹起来，网孔在2公分左右，再将不含沙的水泥加入纤维丝涂在铁丝网上面，等第一层的水
泥干了后再用1、1的水泥沙浆涂改表面，使其上面更为结实。
第四部将干了水泥层粉刷一层，如果是用的彩色的粉刷，在之后就不用做颜色了。
第五部拆除脚手架，撤出现场。